Photographing Sunstars Through Trees And Architecture
A sunstar is the crisp, radiating burst that appears when a small light source is partly hidden behind an object. The sun itself becomes a graphic point of light when branches, rooflines, columns or building corners cover most of its disc. With careful timing and exposure, ordinary streets and bushland can become scenes of geometric rays, glowing edges and deep silhouettes.
The effect depends on the relationship between the sun, the subject and the camera. A tiny change in position can reveal too much of the sun, remove the star completely or turn the frame into a mass of flare. The best results usually come when the sun is low, the foreground has a strong shape and the bright sky is balanced against darker details.
Australia offers excellent conditions for this style of photography. Clear winter mornings in Melbourne, golden-hour light around Sydney’s sandstone buildings, and the sharp contrast of a dry landscape near Perth can all produce striking rays. Gum trees are especially useful because their irregular leaves and fine branches break up the sun in a natural way.
A successful image is rarely the result of aperture alone. Lens design, sensor cleanliness, exposure technique, composition and post-processing all influence the final appearance. The following approach will help you create controlled sunbursts through trees, city structures and other partially obscured light sources.
Find The Right Light And Location
The sunstar becomes more defined as the sun moves lower in the sky. Early morning and late afternoon generally provide a warmer colour, longer shadows and a more manageable brightness range than midday. In Australia, the harsh summer sun can still be difficult to control even near sunset, particularly on pale sand, concrete or reflective glass. Winter often gives a gentler working window.
Look for a subject that can hide most of the solar disc while leaving a narrow opening. A sturdy tree trunk, a branch junction, a balcony edge, a church spire or the corner of a modern tower can work well. Walk several metres in different directions before setting up. Moving sideways changes the overlap between the sun and the obstruction, while moving forward or backward alters the scale of the rays in relation to the scene.
Public parks, coastal paths and urban plazas offer useful combinations of open sky and structured foregrounds. Around Sydney, sandstone walls and fig trees can frame the sun with warm textures. In Melbourne, tram wires, arcades and older civic buildings can add linear shapes, although care is needed near roads and platforms. Check access times, private-property boundaries and national park rules before arriving with a tripod.
Photographers who want to explore equipment choices, editing methods and current imaging technology can also use this digital photography resource as part of their preparation. A little research into a lens’s flare behaviour can save considerable time in the field.
Choose Aperture And Lens Carefully
A narrow aperture creates the recognisable starburst by forcing light through the small opening formed by the lens blades. Start around f/11 or f/16, then adjust according to the lens and the amount of depth of field required. Very small settings such as f/22 can make the rays longer, but diffraction may soften fine detail. The most attractive setting is often a compromise between a clean star and a sharp landscape.
The number and shape of the aperture blades affect the appearance of the rays. Lenses with an even number of blades commonly produce an even number of prominent rays, while lenses with an odd number can create twice as many. This is not a rule for image quality, but it is a useful creative characteristic when comparing lenses. A wide-angle lens makes the sunstar feel integrated into a broad environment, while a standard or short telephoto lens can compress the sun against a building or distant ridge.
Prime lenses often produce a more distinct starburst, though many modern zooms perform very well. Inspect sample images from the exact lens rather than relying on general brand assumptions. Some lenses create attractive, clean rays; others produce large veiling flare, ghost spots or a washed-out contrast when the sun enters the frame.
Use a lens hood whenever possible, even when the hood cannot block the sun directly. It can prevent stray light entering from the side. A clean front element is essential because fingerprints, dust and oily marks scatter bright light and create hazy patches around the sun. Carry a blower and cloth, but clean carefully so grit does not scratch the coating.
Expose For The Bright Sky
The sun is far brighter than any foreground subject, so a normal evaluative exposure may produce a pale sky and weak rays. Begin with aperture priority or manual exposure, set the chosen aperture, and check the histogram and highlight warning. If the sun is visible through a small gap, reducing exposure by one or two stops can preserve colour in the sky and keep the star defined.
Manual exposure is particularly useful when making a series from the same position. Meter from a bright area of sky near the sun, then review the result. The correct setting will vary with haze, cloud and reflective surfaces, so the meter reading is a starting point rather than a guarantee. A slightly underexposed frame usually retains more recoverable information than a completely clipped sky.
The foreground may become almost black when the camera is exposed for the sun. That can be effective if the subject has a recognisable outline. When branches, architecture or people carry important detail, make a second brighter exposure without moving the camera. These frames can be blended later, provided the movement of leaves and people is limited.
High dynamic range techniques are useful at dawn or dusk, but automatic HDR can reduce the graphic quality of a sunstar. Bracketing three or five exposures gives you control over the final balance. A graduated neutral-density filter may help with a straight horizon, although it is less suitable when the transition crosses irregular branches or complex buildings.
Compose Around Shape And Negative Space
A sunstar attracts attention immediately, so its position needs to support the rest of the frame. Placing it near a corner can create a sense of movement along a road, roofline or branch. A central sunburst can work when the architecture is symmetrical, such as a colonnade, tunnel or avenue of trees. Leave enough darker space for the rays to remain visible rather than allowing them to disappear into a bright background.
Use silhouettes as deliberate design elements. Tree trunks, iron railings, arches and balconies can all create a strong foreground pattern. Fine foliage may produce a delicate, fragmented effect, while a solid wall or building edge creates a cleaner, more graphic burst. Look for repeated lines that lead towards the sun, including paths, fences, windows and rows of trunks.
Architecture can provide precision that nature does not. Modern glass towers may reflect the sun and produce secondary highlights, while older brick or sandstone surfaces absorb light and emphasise the contrast. In Brisbane or Adelaide, long shadows from low-rise buildings can help separate a bright sunstar from the street. Avoid including too much blank pavement unless it contributes to the visual balance.
Be conscious of distracting flare ghosts. Bright circles or polygons may appear opposite the sun, especially with wide-angle lenses. Sometimes they add a deliberate visual rhythm; at other times they cover a key branch or window. Shift the composition slightly, shade the lens with your hand outside the frame, or remove the effect later with careful retouching.
Control Focus, Flare And Camera Movement
Autofocus can struggle when the sun is partly hidden by branches. Focus on a nearby trunk, architectural edge or distant subject before recomposing, then switch to manual focus if the camera begins to hunt. At a wide aperture, focus errors are easy to see, but at f/11 or f/16 a considered focus point often provides enough depth for both foreground and background.
Use live view to inspect the edges of the sunstar and to position the bright disc precisely behind the obstruction. Electronic viewfinders can display exposure changes, but optical viewfinders should not be stared at through the sun for extended periods. Avoid looking directly at the sun through a camera, particularly with a telephoto lens, because concentrated sunlight can damage the eye and camera sensor.
A tripod helps with careful composition, bracketing and longer exposures after sunset. It is less useful if wind is moving fine leaves, since the branches may shift between frames. Increase shutter speed when necessary, raise ISO modestly and stabilise the camera with good handholding technique. Image stabilisation should be turned off on some tripod setups, depending on the camera and lens instructions.
The Australian environment adds practical complications. Dust can reach the camera during dry inland conditions, while salt spray around the coast can settle on the front element and tripod hardware. In remote areas, protect equipment from sudden heat and keep spare batteries shaded. In busy city locations, remain aware of cyclists, traffic and security restrictions around government buildings; a compact tripod or monopod is often more practical than a large studio-style support.
Refine Colour And Contrast In Editing
Raw files give you the greatest control over a high-contrast sunburst. Start by setting a neutral white balance, then adjust temperature and tint to match the mood. A warm setting can reinforce late-afternoon light, while a cooler balance can suit blue-hour architecture. If the scene includes concrete, white paint or neutral stone, use those surfaces as references rather than relying entirely on the camera’s automatic setting.
This is where an understanding of white balance becomes valuable. Sunlight passing through haze, leaves or urban reflections can produce colour shifts across the frame, and correcting them globally may remove the atmosphere. Use local adjustments when a building needs neutral colour but the surrounding sky should retain its warmth.
Recover highlights only as far as the raw file allows. A starburst can lose impact if the sky is pushed into a flat grey, while excessive shadow lifting may introduce noise and weaken the silhouette. Adjust blacks, clarity and dehaze carefully. Too much dehaze can create harsh halos around branches and exaggerate flare, so compare the edited image with the original at full size.
Correcting flare requires restraint. Remove obvious sensor spots and accidental dust marks, but do not erase every reflection if it contributes to the image. Chromatic aberration around dark branches against the bright sky can often be reduced with lens corrections. Finish with selective sharpening on architecture and trunks, keeping the smooth sky relatively clean. A carefully exposed sunstar should retain a clear centre, distinct rays and a believable relationship between light and shadow.